36 models · 6 makers · no affiliate links
The synths behind the records you love, still for sale.
Which ones to buy and what to check before you pay.
Where to start
Six synths we’d tell a friend about
Six voices, that chorus and MIDI, and it was Roland's best-seller until the D-50. The catch is six ageing voice chips. We'd buy one where all six have been swapped for new clones, and ask for a video of each voice on its own.
It flopped in 1980 and then turned up on Sexual Healing and Planet Rock. No two sound quite alike, and some need twenty minutes to warm up, so judge one from a recording made once it's warm.
The synth that took the modular Moog sound on tour. The reissues look almost the same, so check the back for MIDI jacks. An original has none. Then make sure every key triggers evenly.
The first polysynth that remembered its sounds, and the opening chords of Thriller. A Rev 3 is the one we'd buy to play. It's the most common and the easiest to get serviced.
Patch cables, two screaming filters and an input for your guitar. Make sure it's an original with no MIDI or USB on the back, and ask which filter board it has.
Its E Piano 1 preset was on 40 percent of the 1986 number ones. So many were made that you can afford to be picky, so hold out for one where every key plays evenly.
Patch in by maker, type or era
Buying guides
Read these before you buy
- Your First Vintage Analog Polysynth: Juno, Polysix, Prophet-600 or OB-8The Juno-60, Juno-106, Polysix, Prophet-600 and OB-8 as a first used polysynth: what each gives up in MIDI, memory and voices, and what fails.
- The Juno-106 Voice Chip: What Fails, How to Spot It, and What Replaces ItWhy Juno-106 voice chips fail, the symptoms to hear in a seller's video, the replacement chips made today, and how to test a used Juno-106 listing.
- TR-808 or TR-909? How Roland's Classic Drum Machines Differ, and What to CheckThe 808 is all analog and has no MIDI. The 909 mixes in samples and has it. How the two differ, and the clones that crowd used listings.
- What an Old Synth Needs from a Tech, and What "Serviced" Should MeanCapacitors, backup batteries, key contacts, pots, calibration and voice chips. What a vintage synth usually needs, and what a serviced listing should show.
- 100V, 120V or 240V? Vintage Synth Voltage and ShippingJapanese 100V, US 120V and European 230V synths, which models have voltage selectors, step-down transformers, and how to ship a heavy synth safely.
- eBay Red Flags for Vintage Synths and Drum Machines"Powers on" only means the lights came on. How to read a used synth listing on eBay, from stock photos and clones to plug-ins and wrong voltage.
Questions buyers ask
Before you buy
Should I buy a Juno-60 or a Juno-106?
Buy the Juno-106 if you want MIDI. It came out in 1984 with MIDI, 128 memories and portamento, but its six 80017A voice chips fail with age, so check them or budget to replace them. The Juno-60 (1982) has an arpeggiator, 56 memories and Roland's DCB port instead of MIDI, though retrofit kits exist. It can also drive pulse width from the envelope, which the 106 can't. It uses the IR3109 filter chip directly, so it doesn't have the 106's voice-chip problem.
Is the Korg Mono/Poly a real polysynth?
No. The Mono/Poly is paraphonic. It has four oscillators, and in poly mode each note gets one of them, so you can play four-note chords. But all four notes share one filter and one set of envelopes, so a chord gets shaped as one sound. It's at its best as a huge four-oscillator mono synth, with an arpeggiator, chord memory and oscillator sync. If you want each note shaped separately, look at the Korg Polysix or a Roland Juno.
Does a vintage synth need servicing before I use it?
Plan on it, especially if it has sat unused for years. These synths are around 40 years old, and parts like electrolytic capacitors and memory backup batteries age. Ask the seller when it was last serviced and what was done. If there's no record, have a technician check the power supply and do a calibration before you rely on it. Also know the model's own weak spot first, such as the Juno-106 voice chips or the Polysix battery.
Can I use a Japanese 100-volt synth in the US or UK?
Yes, with the right transformer. Japan's mains supply is 100 volts, and synths sold new in Japan were built for it. Plenty of them turn up on eBay. Plugging one straight into a UK or European 230-volt outlet can destroy it. US outlets are 120 volts, closer but still above what the synth expects. Check the voltage on the rear-panel label in the photos, and use a step-down transformer rated for that voltage and the synth's power draw.
How can I tell an original from a reissue or clone?
Check the model name, the size and the back panel in the photos. Roland's TR-08, TR-09, JU-06 and JU-06A are small Boutique units. Behringer makes clones such as the RD-8, RD-9 and Pro-1 under its own model names. Sequential's Prophet-5 Rev 4 from 2020 is new, and it has USB. A USB port on anything sold as early 1980s means it isn't original or has been modified. Words like "style" or "clone" in the title mean it isn't the original.
Got a synth sleeping in a closet?
Tell us what it is, whether every voice works and what you’d like for it. Our synth expert will get back to you quickly with a cash offer if it’s a fit.
No affiliate links. We earn nothing. We only recommend what we'd buy, and we'd rather you buy used. How we check and pick.





